1. Choose a suitable cutting environment
4°C-33°C is the best ambient temperature for laser cutting machine operation. Working at a temperature above 33°C for a long time will lead to a sharp increase in the failure rate of the machine. If there is a lot of dust in the working environment or the environment is humid, it will also Let the machine wear out. A suitable working environment can effectively prevent excessive wear and tear of the machine, increase the service life of the equipment, and improve cutting efficiency.
2. Sort out a good cutting route idea
Before laser cutting, simulate the cutting experiment first, organize and plan the best cutting route, and avoid wasting too much time and energy on the cutting route. It is best to complete the cutting at one time, and increase the cutting speed from the cutting line.
3. Adjust to the best cutting parameters
The setting of parameters is also one of the reasons that affect the efficiency of laser cutting. If the parameters are not set properly, it may affect the accuracy of cutting quality and cutting efficiency. In order to achieve the best cutting efficiency, the best way is to adjust by changing the auxiliary gas several times, adjusting the distance between the nozzle and the material, and increasing the power.
4. Regular maintenance and maintenance parts
The fiber laser cutting machine needs to be repaired and maintained every time it is used for a period of time. Due to the laser cutting machine with many accessories and many vulnerable parts, timely replacement, repair and maintenance will greatly improve the cutting efficiency and effectively reduce the failure rate of the equipment.
The above briefly summarizes the problems and steps that need to be paid attention to in the process when the pipe cutting machine fully exerts its functions. When targeting specific materials such as steel pipes, aluminum pipes, and copper pipes, what are the operation and maintenance tips for our laser machines?
Steel pipe cutting machine is an automatic CNC cutting equipment for cutting metal pipe fittings. Compared with the original hand-cutting, not only, but also the cutting and control precision is high. Good equipment requires correct operation and use, so that the smoothness of the cutting surface of the steel pipe intersecting wire cutting machine can be improved. What daily maintenance should be paid attention to during use?
Under normal circumstances, in order to solve the problem of the smoothness of the cutting surface of the steel pipe cutting machine, it is necessary to deal with it from three aspects.
1. In the process of using the steel pipe intersecting wire cutting machine, it must be processed in strict accordance with the power of the equipment. If the power is too large or too small, it will seriously affect the normal use of the steel pipe intersecting wire cutting machine.
2. It is necessary to reasonably control the gas flow rate of the steel pipe intersecting wire cutting machine and the cutting speed of the equipment.
3. Make sure that the tungsten pole of the steel pipe cutting machine is at the same height as the nozzle. In this way, the air flow of the steel pipe intersecting wire cutting machine can be increased. Thereby reducing the damage to the material caused by the steel pipe intersecting wire cutting machine
1. When using the fiber laser cutting machine, it is necessary to clean the guide rails frequently, wipe the rack of the equipment frequently, and apply lubricating oil to the guide rails frequently to ensure that there are no sundries.
2. The motor ring should also be cleaned regularly to clean the lubricating oil, which is conducive to ensuring the operation of the fiber laser cutting machine, and can also cut accurately to ensure the quality of the cutting products.
3. Every week, the equipment management personnel should use a vacuum cleaner to suck away the dust and sundries in the machine, and ensure that all electrical cabinets are protected from dust.
Finally, if you want to ensure the service life of the fiber laser cutting machine, you need to check the straightness and verticality of its track every six months, and if it is found to be abnormal, it must be maintained and debugged in time.
